? semiconductor components industries, llc, 2016 july, 2016 ? rev. 8 1 publication order number: MC10E104/d MC10E104, mc100e104 5 v ecl quint 2\input and/nand gate description the mc10e/100e104 is a quint 2-input and/nand gate. the function output f is the or of all five and gate outputs, while f is the nor. the q outputs need not be terminated if only the f outputs are to be used. the 100 series contains temperature compensation. features ? 600 ps max. propagation delay ? or/nor function outputs ? pecl mode operating range: v cc = 4.2 v to 5.7 v with v ee = 0 v ? necl mode operating range: v cc = 0 v with v ee = ? 4.2 v to ? 5.7 v ? internal input 50 k pulldown resistors ? esd protection: ? > 2 kv human body model ? > 200 v machine model ? meets or exceeds jedec spec eia/jesd78 ic latchup test ? moisture sensitivity: level 3 (pb-free) (for additional information, see application note and8003/d ) ? flammability rating: ul 94 v ? 0 @ 0.125 in, oxygen index: 28 to 34 ? transistor count = 134 devices ? these devices are pb-free, halogen free and are rohs compliant marking diagram* xxx = 10 or 100 a = assembly location wl = wafer lot yy = year ww = work week g = pb-free package plcc ? 28 fn suffix case 776 ? 02 mcxxxe104g awlyyww 1 www.onsemi.com *for additional marking information, refer to application note and8002/d . MC10E104fng plcc ? 28 (pb-free) 37 units / tube MC10E104fnr2g 500 t ape & reel plcc ? 28 (pb-free) ?for information on tape and reel specifications, in- cluding part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d . ordering information device package shipping ? mc100e104fnr2g plcc ? 28 (pb-free) 500 tape & reel
MC10E104, mc100e104 www.onsemi.com 2 f f v cco nc d 4a d 4b d 3a d 3b d 2a d 2b v ee d 1a d 1b d 0a 26 27 28 2 3 4 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 567 8910 q 4 q 4 v cc q 3 q 3 q 2 q 2 d 0b v cco q 0 q 0 q 1 q 1 v cco 1 all v cc and v cco pins are tied together on the die. figure 1. 28-lead pinout (top view) figure 2. logic diagram d 0a d 0b d 1a d 1b d 2a d 2b d 3a d 3b d 4a d 4b f f q 0 q 0 q 1 q 1 q 2 q 2 q 3 q 3 q 4 q 4 warning: all v cc , v cco , and v ee pins must be externally connected to power supply to guarantee proper operation. table 1. pin description pin function d 0a ? d 4b ecl data inputs q 0 ? q 4 ecl and outputs q 0 ? q 4 ecl nand outputs f ecl or output f ecl nor output v cc , v cco positive supply v ee negative supply nc no connect table 2. function outputs f = (d 0a ? d 0b ) + (d 1a ? d 1b ) + (d 2a ? d 2b ) + (d 3a ? d 3b ) + (d 4a ? d 4b )
MC10E104, mc100e104 www.onsemi.com 3 table 3. maximum ratings symbol parameter condition 1 condition 2 rating unit v cc pecl mode power supply v ee = 0 v 8 v v ee necl mode power supply v cc = 0 v ? 6 v v i pecl mode input voltage necl mode input voltage v ee = 0 v v cc = 0 v v i v cc v i v ee 6 ? 6 v i out output current continuous surge 50 100 ma t a operating temperature range 0 to +85 c t stg storage temperature range ? 65 to +150 c ja thermal resistance (junction-to-ambient) 0 lfpm 500 lfpm plcc ? 28 plcc ? 28 63.5 43.5 c/w jc thermal resistance (junction-to-case) standard board plcc ? 28 22 to 26 c/w t sol wave solder (pb-free) 265 c stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device function ality should not be assumed, damage may occur and reliability may be affected. table 4. 10e series pecl dc characteristics (v cc = 5.0 v, v ee = 0.0 v (note 1)) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max i ee power supply current 38 46 38 46 38 46 ma v oh output high voltage (note 2) 3980 4070 4160 4020 4105 4190 4090 4185 4280 mv v ol output low voltage (note 2) 3050 3210 3370 3050 3210 3370 3050 3227 3405 mv v ih input high voltage 3830 3995 4160 3870 4030 4190 3940 4110 4280 mv v il input low voltage 3050 3285 3520 3050 3285 3520 3050 3302 3555 mv i ih input high current 200 200 200 a note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. input and output parameters vary 1:1 with v cc . v ee can vary ? 0.46 v / +0.06 v. 2. outputs are terminated through a 50 resistor to v cc ? 2.0 v. table 5. 10e series necl dc characteristics (v ccx = 0.0 v; v ee = ? 5.0 v (note 1)) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max i ee power supply current 38 46 38 46 38 46 ma v oh output high voltage (note 2) ? 1020 ? 930 ? 840 ? 980 ? 895 ? 810 ? 910 ? 815 ? 720 mv v ol output low voltage (note 2) ? 1950 ? 1790 ? 1630 ? 1950 ? 1790 ? 1630 ? 1950 ? 1773 ? 1595 mv v ih input high voltage ? 1170 ? 1005 ? 840 ? 1130 ? 970 ? 810 ? 1060 ? 890 ? 720 mv v il input low voltage ? 1950 ? 1715 ? 1480 ? 1950 ? 1715 ? 1480 ? 1950 ? 1698 ? 1445 mv i ih input high current 200 200 200 a i il input low current 0.5 0.3 0.5 0.065 0.3 0.2 a note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. input and output parameters vary 1:1 with v cc . v ee can vary ? 0.46 v / +0.06 v. 2. outputs are terminated through a 50 resistor to v cc ? 2.0 v.
MC10E104, mc100e104 www.onsemi.com 4 table 6. 100e series pecl dc characteristics (v ccx = 5.0 v; v ee = 0.0 v (note 1)) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max i ee power supply current 38 46 38 46 44 53 ma v oh output high voltage (note 2) 3975 4050 4120 3975 4050 4120 3975 4050 4120 mv v ol output low voltage (note 2) 3190 3295 3380 3190 3255 3380 3190 3260 3380 mv v ih input high voltage 3835 3975 4120 3835 3975 4120 3835 3975 4120 mv v il input low voltage 3190 3355 3525 3190 3525 3355 3190 3355 3525 mv i ih input high current 200 200 200 a i il input low current 0.5 0.3 0.5 0.25 0.5 0.2 a note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. input and output parameters vary 1:1 with v cc . v ee can vary ? 0.46 v / +0.8 v. 2. outputs are terminated through a 50 resistor to v cc ? 2.0 v. table 7. 100e series necl dc characteristics (v ccx = 0 v; v ee = ? 5.0 v (note 1)) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max i ee power supply current 38 46 38 46 44 53 ma v oh output high voltage (note 2) ? 1025 ? 950 ? 880 ? 1025 ? 950 ? 880 ? 1025 ? 950 ? 880 mv v ol output low voltage (note 2) ? 1810 ? 1705 ? 1620 ? 1810 ? 1745 ? 1620 ? 1810 ? 1740 ? 1620 mv v ih input high voltage ? 1165 ? 1025 ? 880 ? 1165 ? 1025 ? 880 ? 1165 ? 1025 ? 880 mv v il input low voltage ? 1810 ? 1645 ? 1475 ? 1810 ? 1645 ? 1475 ? 1810 ? 1645 ? 1475 mv i ih input high current 200 200 200 a i il input low current 0.5 0.3 0.5 0.25 0.5 0.2 a note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. input and output parameters vary 1:1 with v cc . v ee can vary ? 0.46 v / +0.8 v. 2. outputs are terminated through a 50 resistor to v cc ? 2.0 v. table 8. ac characteristics (v ccx = 5.0 v; v ee = 0.0 v or v ccx = 0.0 v; v ee = ? 5.0 v (note 1)) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max f max maximum toggle frequency 700 700 700 mhz t plh t phl propagation delay to output d to q d to f 225 500 385 725 600 1000 225 500 385 725 600 1000 225 500 385 725 600 1000 ps t skew within-device skew (note 2) d to q 75 75 75 ps t jitter random clock jitter (rms) <1 <1 <1 ps t r t f rise/fall time (20 ? 80%) q f 100 300 425 475 700 700 100 300 425 475 700 700 100 300 425 475 700 700 ps note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 1. 10 series: v ee can vary ? 0.46 v / +0.06 v. 100 series: v ee can vary ? 0.46 v / +0.8 v. 2. within-device skew is defined as identical transitions on similar paths through a device.
MC10E104, mc100e104 www.onsemi.com 5 figure 3. typical termination for output driver and device evaluation (see application note and8020/d ? termination of ecl logic devices) driver device receiver device qd q d z o = 50 z o = 50 50 50 v tt v tt = v cc ? 2.0 v resource reference of application notes an1405/d ? ecl clock distribution techniques an1406/d ? designing with pecl (ecl at +5.0 v) an1503/d ? eclinps i/o spice modeling kit an1504/d ? metastability and the eclinps family an1568/d ? interfacing between lvds and ecl an1642/d ? the ecl translator guide and8001/d ? odd number counters design and8002/d ? marking and date codes and8020/d ? termination of ecl logic devices and8066/d ? interfacing with eclinps and8090/d ? ac characteristics of ecl devices
MC10E104, mc100e104 www.onsemi.com 6 package dimensions 28 lead pllc fn suffix case 776 ? 02 issue f ? n ? ? m ? ? l ? v w d d y brk 28 1 view s s l-m s 0.010 (0.250) n s t s l-m m 0.007 (0.180) n s t 0.004 (0.100) g1 g j c z r e a seating plane s l-m m 0.007 (0.180) n s t ? t ? b s l-m s 0.010 (0.250) n s t s l-m m 0.007 (0.180) n s t u s l-m m 0.007 (0.180) n s t z g1 x view d ? d s l-m m 0.007 (0.180) n s t k1 view s h k f s l-m m 0.007 (0.180) n s t notes: 1. datums -l-, -m-, and -n- determined where top of lead shoulder exits plastic body at mold parting line. 2. dimension g1, true position to be measured at datum -t-, seating plane. 3. dimensions r and u do not include mold flash. allowable mold flash is 0.010 (0.250) per side. 4. dimensioning and tolerancing per ansi y14.5m, 1982. 5. controlling dimension: inch. 6. the package top may be smaller than the package bottom by up to 0.012 (0.300). dimensions r and u are determined at the outermost extremes of the plastic body exclusive of mold flash, tie bar burrs, gate burrs and interlead flash, but including any mismatch between the top and bottom of the plastic body. 7. dimension h does not include dambar protrusion or intrusion. the dambar protrusion(s) shall not cause the h dimension to be greater than 0.037 (0.940). the dambar intrusion(s) shall not cause the h dimension to be smaller than 0.025 (0.635). dim min max min max millimeters inches a 0.485 0.495 12.32 12.57 b 0.485 0.495 12.32 12.57 c 0.165 0.180 4.20 4.57 e 0.090 0.110 2.29 2.79 f 0.013 0.021 0.33 0.53 g 0.050 bsc 1.27 bsc h 0.026 0.032 0.66 0.81 j 0.020 --- 0.51 --- k 0.025 --- 0.64 --- r 0.450 0.456 11.43 11.58 u 0.450 0.456 11.43 11.58 v 0.042 0.048 1.07 1.21 w 0.042 0.048 1.07 1.21 x 0.042 0.056 1.07 1.42 y --- 0.020 --- 0.50 z 2 10 2 10 g1 0.410 0.430 10.42 10.92 k1 0.040 --- 1.02 ---
MC10E104, mc100e104 www.onsemi.com 7 on semiconductor and are trademarks of semiconductor components industries, llc dba on semiconductor or its subsidiaries i n the united states and/or other countries. on semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . a listing of on semiconductor?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent ? marking.pdf . on semiconductor reserves the right to make changes without further notice to any products herein. on semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does o n semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. buyer is responsible for its products and applications using on semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by on semiconductor. ?typical? parameters which may be provided in on semiconductor data sheets and/or specifications can and do vary in dif ferent applications and actual performance may vary over time. all operating parameters, including ?typic als? must be validated for each customer application by customer?s technical experts. on semiconductor does not convey any license under its patent rights nor the right s of others. on semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any fda class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. should buyer purchase or use on semicondu ctor products for any such unintended or unauthorized application, buyer shall indemnify and hold on semiconductor and its officers, employees, subsidiaries, affiliates, and distrib utors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that on semiconductor was negligent regarding the design or manufacture of the part. on semiconductor is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 MC10E104/d literature fulfillment : literature distribution center for on semiconductor 19521 e. 32nd pkwy, aurora, colorado 80011 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative eclinps is a trademark of semiconductor components industries, llc (scillc) or its subsidiaries in the united states and/or oth er countries.
|
